BJ Type Diverter Valve Packers are made in
different sizes i.e. 40" Dia x 6" Ht. and
40" Dia x 14" Ht. Rubber Packers are with
steel rings moulded at the bottom of each
side. These are used in Diverter Valve
Packers with a pressure rating of 150 psi.
They are made of Nitrile Rubber of 70+/-5°
A hardness.
Split/Solid Type Packers are made of approx.
26" Dia x 14" Ht. They are used in Riser
Tensioner Systems mostly used of Floaters.
They come in Split as well as Solid Type.
Their pressure rating is 150 psi. They are
made of Nitrile Rubber of 70+
/ -5°
A Hardness bonded with steel rings and 2 'O'
Rings for proper sealing.
BELL NIPPLES
Bell nipples are tubeless seals size 40" x
¾" having a pressure rating of 150 psi.
These are used on the Bell Nipple Housing to
hold the pipes in their place. Once
pressurized, they grip the housing pipes in
its place. They are tested of 225 psi. They
are made of Nitrile Rubber (Oil-Resistant)
with Brass Nipple at one end.
RUBBER CLAMPING BLOCK FOR BOP HYDRAULIC
HOSES.
Rubber Clamping Block are used for clamping
of BOP Hydrualic Hoses of different sizes.
They are used for clamping of 5 different of
hoses starting from 53 mm to 70 mm. The
clamps/blocks are made of rubber bonded with
galvanized steel plates and an eyebook at
one end of the block. They are made of
specialy formulated Natural Rubber, which is
Abrasion Resistant. We can make these
clamping blocks according to your
specifications.
PTFE EXPANSION JOINTS
Expansion joints are used for compensation
of pipeline movements and vibrations. PTFE
Expansion Joints are used in highly
conentrated acidlines, as PTFE is
chemically inert & flexible. They are
designed to withstand 10kg/cm of pressure
with moulded steel ring on the each
corrugation / arch with steel flanges at
both ends.
ARROW UNION SEALS
Arrow Union Seals are constructed of an
inflatable oil-resistant (Nitrile) tube.
They are used for mud suction return lines
and low pressure fluid lines. When they are
inflated through an automotive type
air-valve, it seals the union. For effective
sealing the fuel pressure should exceed the
line pressure by 50 psi. Micky Arrow Union
Seals make up fast and easily without close
line up. This allow pipe expansion and
proper alignmetn without breaking the Seal.
The Seal can be broken by deflating the
tube.
